Keyword Analysis & Research: protocol tcp port exclusion ranges
Keyword Analysis
Keyword Research: People who searched protocol tcp port exclusion ranges also searched
| Keyword | CPC | PCC | Volume | Score |
|---|---|---|---|---|
| protocol tcp port exclusion ranges | 0.24 | 0.3 | 6255 | 77 |
| remove protocol tcp port exclusion ranges | 0.46 | 0.1 | 6174 | 22 |
| valid tcp port range | 1.46 | 0.9 | 3961 | 45 |
| tcp private port range | 1.72 | 0.7 | 2013 | 60 |
| tcp ip port ranges | 1.77 | 0.1 | 8732 | 26 |
| valid tcp ports are within the range | 1.03 | 0.6 | 9032 | 8 |
| tcp client port range | 0.85 | 0.9 | 6991 | 4 |
| tcp well known port range | 0.54 | 0.7 | 760 | 66 |
| tcp and udp port ranges | 1.46 | 0.6 | 1374 | 1 |
| windows excluded port range | 1.16 | 0.7 | 4036 | 69 |
| tcp port range max | 1.99 | 0.3 | 6234 | 95 |
| port number of tcp protocol | 0.67 | 0.5 | 3855 | 81 |
| tcp high port range | 0.47 | 0.5 | 715 | 79 |
| tcp port range full | 1.04 | 0.7 | 6780 | 90 |
| tcp port number range | 0.61 | 0.2 | 7635 | 98 |
| linux tcp port range | 1.55 | 0.3 | 4578 | 63 |
| range of tcp ports | 1.43 | 1 | 3487 | 53 |
| tcp source port range | 0.36 | 0.9 | 471 | 17 |
| tcp udp port range | 0.92 | 0.1 | 373 | 6 |
| limit rpc port range | 0.65 | 0.6 | 8772 | 92 |
| tcp ip ports and protocols | 1.97 | 0.2 | 1933 | 32 |
| tcp udp ports range | 1.55 | 0.2 | 6676 | 59 |
| limit local port range | 0.66 | 0.5 | 2807 | 15 |
Frequently Asked Questions
However, netsh interface ipv4 show excludedportrange protocol=tcp showed that the port was in one of the exclusion ranges. I was able to follow the solution described in Docker for Windows issue #3171 ( Unable to bind ports: Docker-for-Windows & Hyper-V excluding but not using important port ranges ):
How do I query the range of ports that are excluded?To query the range of ports that is currently excluded, run the following Netshell command: netsh int <ipv4|ipv6> show excludedportrange [protocol=]tcp|udp [ [store=]active|persistent]The following is an example of the output that is generated when you run this command: Start Port End Port
How to restrict the dynamic port range in Hyper-V?Let's say your development is under and up to port 60000, you can issue the following command to restrict the dynamic port range out of it (you must have administrator privileges): To make Hyper-V (and Windows in general) use this new dynamic range you have to reboot your system.
Why is my TCP port reserved?A faulty Windows upgrade is the reason for the problems with reserved tcp ports. See docker/for-win#3171 (comment). That would explain why a clean install fixes these type of problems.
